How to Log Into Your Synology NAS for the First Time and Troubleshoot Common Issues

Share
A Synology NAS device sitting on a desk with its LED status lights glowing.

To log into your Synology NAS for the first time or after setup, start by locating your device on your local network. Then, access its login page using the device’s IP address or QuickConnect ID. Enter the credentials you created in the DSM setup wizard to sign in. A modern Synology NAS has no default blank password login, so if you cannot sign in, reset the administrator password instead of trying default credentials.

Where do I find the Synology login page?

To reach your Synology NAS login page, you need to find its IP address on your local network. You can find this by checking the list of connected devices on your router or by using Synology Assistant software, which scans your network and displays Synology devices with their IP addresses. Another option is to use Synology’s QuickConnect service, which allows remote access without needing the IP address — just enter your QuickConnect ID on the login page.

Once you have the IP address or QuickConnect ID, open a web browser and enter it in the address bar. Typically, the login page appears at http://<IP-address>:5000 or for a secure connection at https://<IP-address>:5001. For QuickConnect, use the URL provided by Synology that includes your QuickConnect ID.

What are the default username and password for Synology login?

A new Synology NAS running modern DSM has no working default login with a blank password. When you first power it on and open the setup wizard, DSM walks you through creating a new administrator account with a username and a strong password of your own. The built in admin account is disabled during this process.

Use the administrator account you created in the setup wizard for everyday administration. The built in admin account is disabled by default. It cannot be deleted, only disabled, so leave it disabled to reduce the risk of unauthorized access.

A computer monitor showing the Synology NAS login screen with the default username entered.

How do I log into my Synology NAS step by step?

  1. Find your NAS IP address by checking your router’s device list, using Synology Assistant, or through QuickConnect.
  2. Open a web browser and enter the IP address or QuickConnect URL.
  3. If this is your first setup, follow the DSM installation wizard to create your administrator account. On later logins, enter the username and password for that account.
  4. When the wizard prompts you, create your administrator username and set a strong password combining letters, numbers, and symbols.
  5. Complete the initial setup steps, including agreeing to terms, setting your time zone, and configuring network settings.
  6. After finishing setup, create any additional user accounts you need.
  7. For security, confirm in the Control Panel under User settings that the built in admin account is disabled. It cannot be deleted, only disabled.

What should I do if I can’t log in?

If you can’t log in, the problem is often a forgotten password, network connection issues, or browser problems.

For a forgotten administrator password, press and hold the reset button on the back of your NAS for about 4 seconds until you hear a beep. This Mode 1 reset lets you sign in and set a new administrator password without affecting your data.

If you have connection problems, first ensure your NAS is powered on and properly connected to your router. From your computer, try pinging the NAS’s IP address to check network connectivity. Also, clear your browser’s cache or try logging in from a different browser to rule out browser issues.

If QuickConnect isn’t working, confirm your NAS has internet access and that QuickConnect is enabled in the Control Panel under Connectivity. Restarting both your router and NAS can also resolve temporary network issues.

How can I keep my Synology login secure?

To keep your Synology NAS secure, start by using a strong, unique password for your administrator account. Avoid easy or common passwords.

Enable two-factor authentication (2FA) in the Control Panel for an added layer of security that requires a code from your mobile device during login.

Limit administrative privileges to only those who need them, and regularly review user accounts to remove or disable unused ones. Set up account lockout policies to defend against brute force attempts.

Use HTTPS for encrypted connections when logging in, and consider changing default ports to reduce exposure.

Keep your NAS firmware and applications up to date to patch security vulnerabilities. If your network setup allows, restrict login access to specific IP addresses to further protect your device.

Conclusion

After logging into your Synology NAS and completing the initial setup, you’ll have full control over your files and backups. Protect your device by updating passwords regularly and enabling two-factor authentication. If you encounter login issues, use the reset button carefully and check your network connections. Following these steps will help you access and secure your Synology NAS with confidence.

Frequently Asked Questions

What if QuickConnect isn’t working to access my Synology NAS?

Check that your NAS is connected to the internet and that QuickConnect is enabled in the Control Panel. Restart your NAS and router if needed, and make sure your QuickConnect ID is entered correctly.

Can I change my Synology login password later?

Yes, you can change your password anytime in the Control Panel under User settings. Regularly updating your password helps keep your NAS secure.

What happens if I forget my Synology password?

You can reset the administrator password by pressing the reset button on your NAS for about 4 seconds until you hear a beep. This Mode 1 reset lets you sign in and choose a new administrator password without deleting your data.

Is it safe to use the default admin account?

No. Use the administrator account you created during setup, with a strong password, and keep the built in `admin` account disabled. That account cannot be deleted, only disabled.