Starlink Outage Map and How to Check If Your Connection Is Down

Share
A Starlink satellite dish installed on a rooftop under a clear sky.

If your Starlink internet suddenly stops working, the quickest way to check if it's a widespread outage is to look at third party outage maps and official status updates. Starlink itself does not publish a detailed outage map. The maps people use come from sites like Downdetector, which build them from user reports, and they show if others in your area are affected. Before contacting support, you can also try straightforward troubleshooting steps on your Starlink hardware to fix common local issues.

To find out if Starlink is down near you, visit trusted outage tracking websites like DownDetector or IsTheServiceDown. These sites gather user reports and sometimes data from Starlink to show maps highlighting where users are having problems, usually in real time. You can enter your location or zoom in to see if your area is listed.

Also check Starlink’s official website or the Starlink app for status updates or alerts about outages or maintenance. Comparing these sources helps you tell if the issue is a local problem or part of a larger service interruption.

What does the outage map data mean and how current is it?

Outage maps use colors to show how many users have reported problems in different areas. Darker or brighter colors usually mean more reports. Remember, these reports are user-submitted and may not always mean a confirmed outage—some might be isolated or device-specific.

The data refresh rate varies by site but is often every few minutes to an hour. Official Starlink status pages may give more accurate information about confirmed outages. A sudden increase in reports generally means a widespread problem, while scattered reports often point to individual issues.

Starlink outages can happen for several reasons. Bad weather like heavy rain, snow, or thick clouds can weaken the satellite signal temporarily. SpaceX sometimes performs maintenance or network upgrades that cause planned or unplanned outages.

Problems with your equipment—such as a dish that’s not properly aligned, damaged cables, or power issues—can also cause connection drops. Network congestion during busy times might slow your connection or cause interruptions. Knowing these causes helps you decide if you should wait or try fixing the issue yourself.

Try these steps to fix your connection before reaching out to support:

  1. Unplug your Starlink dish and router from power, wait 30 seconds, then plug them back in.
  2. Make sure all cables connecting the dish, router, and power source are securely attached and undamaged.
  3. Check that the dish has a clear, unobstructed view of the sky—no trees, buildings, or other objects blocking it.
  4. Use the Starlink app to check signal strength and run diagnostics if available.
  5. Restart any devices connected to your Starlink network to rule out device-specific issues.

These steps often resolve minor or local problems without needing help from support.

Close-up of hands reconnecting cables on a Starlink satellite dish and router setup.

How do I confirm if my fixes worked or if the outage persists?

After troubleshooting, test your internet by loading websites or streaming content. If it works, the problem was likely local and your fixes helped.

If the connection still fails, check outage maps and official status pages again to see if your area is still affected by a wider outage. Comparing your experience with reported data helps confirm if the issue is ongoing. Keep monitoring these sources for updates on when service might be restored.

To stay updated:

  • Follow official Starlink social media accounts and check their website status page for announcements on outages and maintenance.
  • Use outage tracking websites like DownDetector for real-time user reports and maps.
  • Join community forums and Starlink user groups on Reddit or similar platforms, where users share experiences and unofficial updates.

Subscribing to notifications or checking these regularly helps you track ongoing issues and estimated times for service restoration.

Applicability

This guidance applies to all current Starlink hardware and software versions. No special privileges are required to check outage maps or perform the troubleshooting steps listed. These steps are safe to perform and do not require restarting your devices beyond what is described.

Conclusion

If your Starlink connection drops, start by checking reliable outage maps and official status updates to see if the problem affects others nearby. Running simple troubleshooting on your hardware often fixes local issues quickly. If the outage continues, keep monitoring updates to know when service might return, and contact Starlink support if needed.

Frequently Asked Questions

Yes. Many outage tracking websites let users report connectivity issues. Reporting your problem helps improve the accuracy of outage maps and can assist other users in your area.

Starlink currently provides status updates mainly through its website and app but does not offer a detailed outage map like third-party services. It's best to use a mix of official channels and trusted outage tracking sites.

How often should I check for updates during an outage?

Checking every 30 minutes to an hour is usually enough. Outage and restoration updates typically don’t happen more frequently, so checking too often may not provide new information and could cause unnecessary worry.

Read more