How to Fix Connection Issues with find.synology.com for Your Synology NAS

Share
A Synology NAS device positioned on a desk in a home office environment

If you can't connect to your Synology NAS using find.synology.com, it's usually because the device isn't being detected on your local network. This site locates your NAS by using local network broadcasts, so network settings or firewalls often block the connection. Fixing this involves checking your network setup, firewall rules, and NAS software, then verifying the connection through alternative methods if needed.

Why can’t I connect to my Synology NAS using find.synology.com?

When find.synology.com can’t find your NAS, you might see no devices listed or error messages like:

No Synology NAS found
Unable to connect to the server
Error

This happens because your browser can't detect the NAS broadcasting on the local network. You may also experience timeout errors or fail to access your NAS’s web interface via the find.synology.com link. These issues often occur right after initial setup or after network changes.

How does find.synology.com discover my NAS on the network?

find.synology.com locates your NAS by using local network discovery from your own computer. When you open the site, the Web Assistant in your browser triggers discovery on your local network, looking for a NAS that responds on the same subnet. Synology's remote servers do not listen to your local network, and broadcast traffic does not leave your LAN. For this to work, your NAS and your computer must be on the same network segment, and your router or firewall must allow multicast or broadcast traffic. QuickConnect is not required for this local discovery. QuickConnect is a separate remote access service, useful only when you want to reach your NAS from outside your home network.

A Synology NAS device connected via Ethernet cable to a router illustrating network setup

What can block find.synology.com from finding my NAS and how do I fix it?

Common reasons why find.synology.com might not detect your NAS include:

  • Firewall or Security Software: Firewalls on your PC or router can block discovery traffic. Temporarily disable firewalls or add exceptions for Synology services and ports.
  • Network Configuration Issues: If your NAS and computer are on different subnets or VLANs, broadcasts won’t reach the NAS. Make sure both devices are on the same subnet or check if your router supports multicast forwarding.
  • Outdated NAS Software: Older DSM versions may not support current discovery protocols. Update your NAS firmware using Synology Assistant or manual update.
  • Browser or DNS Issues: Browser settings or DNS caching can interfere. Try a different browser or clear your DNS cache.

To troubleshoot step-by-step:

  1. Confirm your NAS and computer are connected to the same network.
  2. Temporarily disable firewalls on your computer and router.
  3. Update your NAS to the latest DSM version.
  4. Use Synology Assistant as an alternative to find.synology.com.
  5. Restart your NAS and router to refresh network settings.

If these steps don’t work, check your router’s multicast and broadcast settings and consult its documentation to enable local device discovery.

A person using a laptop to adjust firewall settings with a Synology NAS device visible next to them

How do I confirm my Synology NAS is accessible after troubleshooting?

After making changes, verify your NAS is reachable by:

  1. Visiting find.synology.com again to see if your NAS appears.
  2. Running Synology Assistant on your computer to scan and list Synology devices on your network.
  3. Accessing your NAS directly by entering its local IP address in your browser. If you don’t know the IP, find it through Synology Assistant or your router’s connected devices list.

Expected results:

  • find.synology.com lists your NAS with its name and status.
  • Synology Assistant detects your NAS and shows its IP address.
  • Entering the IP in your browser opens the NAS login page.

If these fail, review your network connectivity or consider resetting network settings on your NAS.

What can I do to avoid find.synology.com connection problems in the future?

To reduce future discovery issues:

  • Keep your NAS firmware updated for the latest network and security fixes.
  • Ensure your router and firewall allow multicast and broadcast traffic.
  • Assign a stable IP to your NAS using DHCP reservation or static IP to avoid conflicts.
  • Avoid splitting your network into multiple subnets without proper routing for discovery traffic.
  • Restart your NAS and network devices regularly to clear temporary issues.

Following these steps helps maintain reliable detection of your NAS on the network.

Applicability

This guide applies to Synology NAS devices running DSM firmware versions that support find.synology.com and QuickConnect services. Administrator privileges on the NAS and access to your router are needed for configuration changes. Restarting your NAS and router is recommended during troubleshooting. Backing up your data is not required for these steps.

Conclusion

If find.synology.com can’t locate your Synology NAS, it's usually due to network discovery being blocked or misconfigured. Start by confirming your NAS and computer share the same network, then check firewall and router settings. Use Synology Assistant or direct IP access as backup methods to confirm connectivity. Keep your NAS software updated and your network configured to allow discovery traffic to prevent issues. If problems continue, review your network setup or contact Synology support.

Frequently Asked Questions

Can I access my Synology NAS without using find.synology.com?

Yes. You can enter your NAS’s local IP address directly into your browser or use Synology Assistant to locate it on your network.

Why does find.synology.com only work on my local network?

find.synology.com relies on local network discovery protocols that don’t function across different networks or the internet unless you use remote access features like QuickConnect.

What ports need to be open for find.synology.com to detect my NAS?

Your NAS discovery uses multicast and broadcast traffic on your local network, so firewalls should allow this traffic. While specific ports vary, enabling UPnP and SSDP traffic usually helps.