Find Synology on your network and open it in a browser
If your Synology NAS is powered on and you can’t remember its IP address, the fastest way to find it is usually `find.synology.com` or Synology Assistant. Both tools scan your local network and try to open the NAS login page for you. If the NAS still doesn’t appear, check the router’s DHCP/client list and then try a direct IP lookup.
What you need before you start
- The Synology NAS must be powered on.
- The NAS should be connected to the same local network as your computer or phone.
- For the best chance of being found, connect the NAS by Ethernet to the router or switch.
- Your computer should also be on that same network, not on a guest Wi‑Fi, mobile hotspot, or VPN.
- If you plan to use Synology Assistant, have a Windows, macOS, or Linux computer ready.
- If you have more than one Synology device, be ready to check the model name or IP before you log in.
Discovery tools only work on the local network. If the NAS is off, unplugged, on a different subnet, or behind a separate router, it usually won’t show up.
The fastest way to find a Synology NAS
Start with find.synology.com. Open it in a browser from a computer or phone on the same network as the NAS. The page scans for a Synology device and, when it finds one, shows its status and a button to connect. If the NAS is set up and reachable, the browser should take you to the DSM login page.
If that doesn’t work, use Synology Assistant on a computer. Install and open it, then let it scan the local network. When the NAS appears, select it and open the management page from there.
Use whichever method is quicker for you:
- Open
find.synology.comin a browser. - Wait for the scan to finish and look for your NAS in the results.
- If it appears, open the login page from the prompt.
- If it doesn’t appear, install and run Synology Assistant on a computer on the same network.
- Select the NAS from the list and open its DSM page.
- If you already know the IP address, type it directly into the browser, such as
http://192.168.1.50:5000orhttps://192.168.1.50:5001, depending on how DSM is set up.
If your Synology still doesn’t show up
If discovery fails, check the network path first. The NAS and your computer need to be on the same LAN. A laptop on guest Wi‑Fi, a phone on cellular data, or a computer connected through a different router often won’t see it. If you use a VPN, turn it off for the moment.
Next, check the router’s client list. Most routers show connected devices, often under DHCP clients, LAN clients, or attached devices. Look for a Synology entry or a device with the NAS’s MAC address if you know it. If the router shows the NAS but find.synology.com does not, the problem is usually the discovery tool rather than the NAS itself.
If the NAS has no visible address, try a direct IP lookup from the router. The router’s client list may show the current IP assigned by DHCP. Open that IP in a browser, using the DSM port if needed.
You can also try these fixes:
- Switch to a different browser.
- Try a different computer on the same network.
- Move the NAS and the computer onto the same wired or wireless network segment.
- Reboot the NAS.
- Reboot the router or switch if the NAS still stays hidden.
Don’t reset the NAS just because it doesn’t appear in discovery. A reset can change settings you may still need and is not the first step for a missing device.
If the NAS still won’t appear after a reboot, check whether it is plugged into the correct port on the router or switch, and make sure the Ethernet link light is on. A bad cable or a dead switch port can make the NAS invisible even though it’s powered up.
How to tell you found the right box
When you see more than one Synology device, don’t log in until you match the box to the device you meant to find. The safest checks are the model name, the IP address, and any serial or unique identifier shown in Synology Assistant or the router list.
Look for the exact model, such as DS218+, DS224+, or RS series, so you know you’re opening the right unit. Then compare the IP address with the one your router assigned. If two devices are on the network, this is usually the fastest way to separate them.
If the interface shows a serial number or part of one, compare that with the label on the NAS chassis or the invoice/packing materials you already have. If the NAS name was changed in DSM, the custom name can help too, but model and IP are usually the most reliable checks.
If you’re still unsure, disconnect or power down the other Synology device temporarily and scan again. Only do this if you know which unit you can safely turn off.
When the browser opens but you can’t get in
If the NAS is found but login fails, the problem is usually credentials rather than discovery. Try the admin account you normally use, and check whether you’re entering the right password for DSM. If you forgot the password, use the password reset option on the NAS only if you’re sure you understand what it changes.
Don’t start with a full reset unless you’ve ruled out a simple login issue. A password reset and a full system reset are very different, and the second one can have much bigger effects on your setup.
If you can reach the login page but the browser keeps failing, try another browser or clear saved autofill entries. Some people also find that opening the IP address directly, instead of the saved bookmark, avoids stale browser data.
If the device is visible in find.synology.com or Synology Assistant but the page will not accept any login, the next step is to confirm which account should have access before changing the NAS itself.
Conclusion
Once you can see the NAS in `find.synology.com`, Synology Assistant, or your router’s client list, open the matching IP in a browser and log in to DSM. If the device only shows up after a reboot, keep an eye on the network path and the router list so you know where it’s getting its address. If you manage more than one Synology box, label them in DSM after you get in so the next lookup is much easier.
Frequently Asked Questions
Can I find a Synology NAS from a phone?
Yes, if the phone is on the same local network. `find.synology.com` is the quickest option, but a phone on guest Wi‑Fi or cellular data usually won’t see the NAS.
Why does Synology Assistant see the NAS but my browser doesn’t?
That usually means the NAS is reachable on the LAN but the browser is using the wrong address, a cached bookmark, or the wrong protocol/port. Open the IP shown by Synology Assistant directly.
What if I have two Synology NAS devices?
Check the model name and IP address before logging in. If needed, power down one unit briefly so you can confirm the other one without guessing.