How to find IP address on iPhone using Wi‑Fi or router
If you need your iPhone’s IP address, the fastest place to check is in Wi‑Fi settings. For most home or office setups, that’s the local IP address your router assigned to the phone on that network. If Wi‑Fi is off, you can still see an address through cellular data, but that’s usually not the one you need for router setup or local troubleshooting.
What kind of IP address do you actually need?
Start with the right address, because iPhone can show more than one.
- A local Wi‑Fi IP address is the address your router gives your iPhone on your private network. It usually looks like
192.168.x.x,10.x.x.x, or172.16.x.xthrough172.31.x.x. - A public IP address is the address the internet sees for your network. Your router usually shares one public address with every device at home.
- A cellular IP address is assigned by your mobile carrier when Wi‑Fi is off. It may change often and is not always useful for router access.
If you’re setting up a printer, checking a router rule, or giving support the address of your phone on the same network, you usually want the local Wi‑Fi IP. If a website or remote support tool asks for the address your network uses on the internet, you want the public IP instead.
A quick way to confirm you’ve got the right one is to check where you found it. If you got it from Settings > Wi‑Fi, it’s the local Wi‑Fi address. If you got it from a web search or a router status page, it’s usually the public IP. If the number starts with 192.168., 10., or 172.16 through 172.31, it’s a local private address, not the public one.
Find your iPhone’s IP address in Wi‑Fi settings
This is the quickest path for a normal home or office network.
- Open Settings.
- Tap Wi‑Fi.
- Make sure Wi‑Fi is on and your iPhone is connected to the network you care about.
- Tap the name of that network.
- Look under IP Address or IPv4 Address.
You should see the address your iPhone is using on that Wi‑Fi network, along with related details like subnet mask and router. If you have more than one network nearby, check that the Wi‑Fi name matches the one you actually use at home or work.
If the network uses IPv6, you may also see an IPv6 address. For most router setup and local troubleshooting, the IPv4 address is the one people mean when they ask for the iPhone’s IP address.
If you’re not sure whether it’s the right address, compare it with the router details on the same screen. The iPhone’s own IP should fit the same private network range as the router and subnet mask shown there.
If you need the public IP address instead
If you need the address the internet or your router’s outside connection sees, you’re looking for the public IP address, not the local one.
The quickest way is to open a browser on your iPhone and search for “what is my IP.” The result shown by the search engine or a site like a router status page is usually your public IP address.
A few things to keep in mind:
- That address often belongs to your router or carrier, not just your iPhone.
- Everyone on the same home network may share it.
- It can change when your router reconnects, your ISP reassigns it, or you move to a different network.
If you’re troubleshooting remote access, make sure the person helping you knows you’re giving the public address, not the local Wi‑Fi one.
How to find the IP address when you’re using cellular data
When Wi‑Fi is off and your iPhone is on cellular data, the phone still has an IP address, but it’s assigned through your carrier’s mobile network. That address is usually not the one you need for home router setup or device-to-device access on a local network.
If you still need to check it, use a site or service that shows your public IP address while cellular data is active. Turn off Wi‑Fi first, then open Safari and look up “what is my IP.” The address you see is the one currently used by the cellular connection.
Keep in mind that mobile carriers often route traffic through shared systems, so this address can change and may not point cleanly to one device the way a Wi‑Fi address does. For local troubleshooting, reconnect to Wi‑Fi and check the address in Settings > Wi‑Fi instead.
What to do if you don’t see an IP address
If the IP address field is blank or keeps changing, the issue is usually with the connection rather than the iPhone screen itself.
- Make sure Wi‑Fi is actually connected, not just turned on.
- Check that you tapped the current network name, not an old saved one.
- Move closer to the router if the signal is weak.
- Turn Wi‑Fi off and back on, then reconnect.
- If the address keeps changing, your router may be using DHCP and handing out a new address each time the phone reconnects.
- If the field stays blank, the router may not be assigning addresses correctly, or the network may have a connection problem.
In a home network, a reboot of the iPhone and router often clears a temporary assignment issue. If the network is managed by work or school, the router or access point may have rules that affect address assignment.
Quick check that you copied the right address
Before you use the address in a router, printer setup, or support call, do a fast check that it fits the job.
- If it starts with
192.168.,10., or172.16through172.31, it is probably a local Wi‑Fi address. - If it came from a web search or a router status page, it is probably the public IP address.
- If you’re on cellular data and the address changed after Wi‑Fi turned off, that’s normal.
For a stronger check, compare the phone’s IP address with the router’s subnet or gateway shown on the same Wi‑Fi details screen. If the first three parts of the address fit the same private network, you likely copied the right local address. If you’re trying to sign in to the router admin page, use the router address shown beside Router on the same screen, not the iPhone’s own IP.
Conclusion
If you only need the address for a home or office network, the Wi‑Fi screen in Settings is usually the right place to check. If you need the address seen from the internet, use a browser and look up your public IP. When the result seems odd, confirm whether you’re on Wi‑Fi or cellular and compare the address with the router details on the same screen. That usually tells you immediately whether you have the right number.
Frequently Asked Questions
Why does my iPhone show a different IP address every time I connect?
That usually means your router is using DHCP, so it hands out an address from a pool instead of keeping the same one. A reconnect, reboot, or router change can give your iPhone a new local IP address.
Can I change my iPhone’s IP address manually?
Yes, on some Wi‑Fi networks you can switch the network’s IP settings from automatic to manual, but that changes the local address only. Use care, because a wrong manual setting can break the connection.
Is the IP address in Wi‑Fi settings private or public?
It is the private local IP address for that Wi‑Fi network. It is not the public address that websites or outside services usually see.