eero settings: where to find them and how to change them
If you already have an eero mesh system and just need to change a setting, most of what you need is in the app. The usual places to look are guest access, DNS, DHCP and reservations, parental controls, port forwarding, and notification settings. The first thing to check is whether you’re editing the right network, since some options affect the whole home network and others only apply to a guest network or one device.
Prerequisites
- The eero app installed and signed in to the account that manages the network
- Access to the home network you want to change
- Admin privileges for that network, if another person set it up
- The device or setting you want to control identified ahead of time, so you do not have to guess while changing the network
Quick answers to the most common eero settings questions
Do you need the eero app to change settings? Yes, in practice you usually do. Most meaningful eero settings are managed from the app rather than from a web page.
Where do you find the main settings? Open the eero app, then go to the network settings area for the network you want to edit. That is where you’ll find the controls for guest access, DNS, DHCP and reservations, parental controls, port forwarding, notifications, and related network options.
What do the main menus control? Guest access creates a separate Wi‑Fi network for visitors. DNS changes how your network looks up internet addresses. DHCP and reservations control how devices get IP addresses on your network. Parental controls manage access rules for devices. Port forwarding tells incoming traffic where to go inside your network. Notification settings control what alerts the app sends you.
What happens after a restart? The network goes down briefly and devices reconnect when the eero units come back online. A restart can help if a setting seems stuck, but it can also interrupt calls, streaming, and smart-home devices for a short time.
Which settings affect speed the most? DNS changes can help with certain loading issues, and a bad port forward or network mode can hurt performance, but the biggest speed gains usually come from placement, signal quality, and avoiding unnecessary network changes. Guest access, notifications, and parental controls do not usually make Wi‑Fi faster or slower by themselves.
Which settings are usually safe to adjust first? Guest access, notification settings, and parental controls are the safest places to start. DNS is also reasonable to change if you are troubleshooting a specific browsing or loading problem. DHCP, reservations, port forwarding, and bridge mode deserve more care because they can change how devices join the network or how traffic reaches them.
Which settings can cause outages or device issues if changed carelessly? DHCP, bridge mode, port forwarding, and DNS are the ones to treat carefully. Those can affect how devices get addresses, reach the internet, or accept incoming connections.
Why does a setting disappear after you change something else? Some eero options only show up in certain network modes or with certain features turned on. If that happens, check the current mode of the network and whether the option depends on a specific plan or device setup.
How to change eero settings in the app
- Open the eero app and select the network you want to change. The app should show the controls for that home network rather than a different one, if you manage more than one.
- Go to the network settings area and pick the setting that matches the problem you are trying to fix. Use guest access for visitors, DNS for name-resolution issues, DHCP and reservations for address assignments, parental controls for device rules, and port forwarding for incoming traffic.
- Change only one setting at a time. That makes it easier to tell whether the change helped or caused a new problem.
- Save the change and wait for the app to update. If the setting applies correctly, the app should keep the new value and the network should continue working with that change in place.
Changing DHCP, bridge mode, or port forwarding can disconnect devices or break services you already use. If you are not sure what a setting does, change the safer options first and leave the advanced ones alone until you know why you need them.
- Test the device or service you were trying to fix. If you changed DNS, try loading a site or app that was slow before. If you changed port forwarding or reservations, test the specific device or service that depended on it.
- If the change did not help, undo it before trying something else. That keeps you from stacking multiple changes and makes troubleshooting much easier.
What to do if a setting looks missing, greyed out, or ignored
If a setting looks missing, first make sure you are editing the right network. Some options only appear for the main home network, some only for a guest network, and some depend on the current network mode.
If a setting is greyed out, the app may be limiting it because another feature is already in use, the network is in a different mode, or your setup does not support that option. Check whether the feature depends on a specific plan or device setup.
If a setting saves but does not seem to take effect, refresh the app, check the device itself, and give the network a moment to sync. If needed, restart the eero network and test again. A restart does not normally erase your settings, but it does interrupt Wi‑Fi briefly while the hardware comes back online.
If the option still does not appear or behave the way you expect, look at the current network mode and whether another setting is overriding it. That is often the reason an eero setting seems to be missing or ignored.
Verify it worked
You know the change worked when the app still shows the new setting after you return to it, and the device or service you were trying to fix behaves the way you expected. For example, a guest network should appear for visitors, a parental control rule should affect the selected device, and a port forward should point traffic to the right device.
If the problem is still there, check whether you edited the right network, whether the app fully synced, and whether another setting is overriding the one you changed. That usually tells you whether the issue is the setting itself or something else on the network.
Conclusion
If you only want to fix one thing, start with the setting that matches the problem instead of changing the whole network. Guest access and parental controls are the safest places to begin, while DNS, DHCP, port forwarding, and bridge mode deserve more care. If a change doesn’t seem to work, check whether you’re on the right network, refresh the app, and test the device itself rather than trusting the screen alone. That usually tells you whether the problem is the setting, the sync, or the device you’re trying to reach.
Frequently Asked Questions
Can I change eero settings without the app?
Usually no. Most eero settings are meant to be changed in the app, and that’s where you’ll find the controls for the network and individual devices.
Will restarting eero erase my settings?
No, a restart normally keeps your settings. It just interrupts Wi‑Fi briefly while the hardware comes back online.
Which eero setting is most likely to break devices if I change it carelessly?
DHCP, bridge mode, port forwarding, and DNS are the ones to treat carefully. Those can affect how devices get addresses, reach the internet, or accept incoming connections.
Why can’t I see a setting I’ve read about?
It may depend on your eero model, your network mode, your account permissions, or a plan feature that isn’t available on your setup.