How to Fix DNS Server Not Responding Error and Restore Your Internet Connection

Share

The "DNS server not responding" error means your device can't contact the DNS service that translates website names into IP addresses. Without this, your browser can’t find websites, making it seem like your internet is down. This error often happens due to issues like router glitches, DNS misconfigurations, or temporary outages, and you can usually fix it by restarting devices, changing DNS settings, or updating network configurations.

What does 'DNS server not responding' mean and why does it happen?

DNS, or Domain Name System, acts like the internet’s address book. When you enter a website name, your device asks a DNS server to find the corresponding IP address. If the DNS server doesn’t respond, your device can’t connect to the site, causing the "DNS server not responding" error.

This error can occur for several reasons. Your router may have trouble communicating with the DNS server or could have an internal fault. Your Internet Service Provider (ISP) may be experiencing DNS server outages or network issues. Incorrect network settings or a corrupted DNS cache on your device can also block DNS communication. Additionally, security software or VPNs might interfere with DNS responses. Knowing these causes helps you choose the right fix.

How can I tell if this is my device, my router, or my ISP?

Start by checking if other devices on your network also can’t access websites and show similar errors. If multiple devices are affected, the issue is likely with your router or ISP.

Next, restart your router by unplugging it for about 30 seconds and plugging it back in. This often clears temporary router glitches.

If other devices work fine after the restart but yours doesn’t, the problem is probably with your device.

You can also test DNS responsiveness from your device. Open Command Prompt or terminal and ping a known DNS server like Google’s 8.8.8.8:

ping 8.8.8.8
Command Prompt

If the ping works but you still get DNS errors when browsing, the issue is with DNS resolution rather than your network connection. To confirm, try pinging a website by name:

ping google.com
Command Prompt

If this fails, DNS is definitely the issue. If all devices can’t ping external IPs, the problem likely lies with your ISP or router.

What are the easiest first steps to try fixing the DNS server error?

Try these simple and safe fixes first:

  1. Restart your device to clear temporary network glitches.
  2. Restart your router as described above.
  3. Change your DNS server to a public one like Google DNS (8.8.8.8 and 8.8.4.4) or Cloudflare DNS (1.1.1.1 and 1.0.0.1) to bypass your ISP’s DNS. To change DNS on Windows:
  • Open Control Panel > Network and Sharing Center > Change adapter settings.
  • Right-click your network connection and select Properties.
  • Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
  • Choose "Use the following DNS server addresses" and enter the new DNS addresses.
  1. Clear your device’s DNS cache to remove outdated or corrupted entries:
ipconfig /flushdns
Command Prompt

After these steps, try accessing websites again.

What advanced fixes can help if the basic steps don’t work?

If the earlier steps don’t fix the problem, try these more advanced fixes:

  1. Update your network adapter drivers. Outdated or corrupted drivers can cause DNS issues. On Windows:
  • Open Device Manager.
  • Expand Network adapters.
  • Right-click your adapter and select Update driver.
  1. Reset the TCP/IP stack to fix network communication:
netsh int ip reset
Command Prompt (run as Administrator)
  1. Temporarily disable your firewall or antivirus software to see if they’re blocking DNS traffic.
  2. Disable any VPNs you use, as they can reroute DNS queries and cause conflicts.
  3. Check your router’s firmware version. An outdated firmware can cause network problems. Log into your router’s admin panel (usually at 192.168.1.1 or similar) and look for firmware update options.

Always back up your router settings before updating firmware.

  1. If router settings seem problematic, consider resetting the router to factory defaults. This will erase custom settings, so back up first.

How do I confirm that my DNS is working properly again?

After applying fixes, confirm DNS is working:

  1. Open Command Prompt or terminal.
  2. Use nslookup to check DNS response:
nslookup google.com
Command Prompt

You should see the DNS server address and IP addresses for google.com. If you get a timeout or no response, DNS is still not working.

  1. Try pinging a website by name:
ping google.com
Command Prompt

If you receive replies, DNS resolution is working.

  1. Finally, open a browser and visit several websites to verify your internet access is restored.

What can I do to prevent DNS server errors from happening in the future?

To reduce the chance of DNS errors:

  • Use reliable public DNS servers like Google DNS or Cloudflare DNS, which tend to be fast and stable.
  • Keep your router’s firmware and your device’s network drivers up to date.
  • Restart your router regularly to clear temporary glitches.
  • Avoid security software or firewall settings that might block DNS traffic.
  • Monitor your network’s health by checking that devices connect smoothly and DNS queries respond quickly.
  • If you use VPNs, choose ones that handle DNS properly or configure them to prevent DNS leaks.

Following these steps helps keep DNS running smoothly and your internet connection reliable.

Before you start

This guide applies to most Windows versions and common routers. You will need administrator privileges on your device to change network settings or run command-line tools.

Restarting devices and changing DNS settings do not require backing up data but backing up your router settings before firmware updates or resets is recommended.

Start with checking other devices on your network and basic restarts before moving to advanced steps.

Conclusion

If you see the "DNS server not responding" error, begin by restarting your device and router, then try switching to a public DNS server. If the problem continues, update your network drivers and reset network settings. Use tools like nslookup to test DNS response. Keeping your network devices updated and using reliable DNS providers can prevent future errors. If none of these steps work, contact your ISP for help.

Frequently Asked Questions

Why does changing the DNS server fix the problem?

Changing to a public DNS server like Google or Cloudflare bypasses your ISP’s DNS, which might be down or slow. Public DNS servers are often more reliable and resolve addresses when your usual DNS server fails.

Can a VPN cause DNS server not responding errors?

Yes, some VPNs reroute DNS queries and may cause conflicts or block DNS responses. Temporarily disabling your VPN can help determine if it’s causing the issue.

Is it safe to disable my firewall to fix DNS errors?

Disabling your firewall briefly for troubleshooting is usually safe if you reconnect it soon after. Firewalls can sometimes block DNS traffic unintentionally, so testing with it off helps identify the cause.

Does flushing DNS cache delete important data?

No, flushing the DNS cache only clears stored DNS lookups on your device. It removes outdated or corrupted entries without affecting personal or important files.