> ## Content Index
> Fetch the complete content index at: https://routerhaven.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# How to modify IP address on your device without losing connectivity
- URL: https://routerhaven.com/modify-ip-address-device/
- Published: 2026-11-09T03:50:00.000Z
- Updated: 2026-11-09T03:50:00.000Z
- Author: Caleb Renwick
- Tags: Networking

If you want to modify an IP address, first decide whether you mean the private IP address on your home network or the public IP address your internet provider gives your connection. For a home device, the safest change is usually switching from automatic assignment [to a manual static](https://routerhaven.com/static-ip/) IP inside your router’s range, or using a router reservation if your router supports it. Before you edit anything, collect the current network details and the new values you plan to enter so you can revert quickly if needed.

## Prerequisites

- Access to the device you want to change, with permission to edit its network settings.
- The current network details for that device or router.
- The new `IP address`, `subnet mask`, `gateway`, and `DNS` values you plan to use.
- A way to get back to automatic addressing if the change does not work.
- For a public IP change, access to your internet provider’s account or support options, since that address is usually managed by the ISP.

![A home router sits beside a laptop on a desk.](https://tse1.mm.bing.net/th?q=home%20router%20and%20laptop%20on%20desk%20photo&w=624&h=352&c=7)

## How to modify an IP address

1. Open the current network settings for the device or router.

On Windows, open the active network connection details in Settings.

On macOS, open the active network details in System Settings.

On iPhone, open the Wi-Fi network details for the connected network.

On Android, open the Wi-Fi network details for the connected network.

On common routers, open the router’s admin page and look for LAN, DHCP, or local network settings.

1. Check whether you are changing a private/local IP address or a public IP address.

A private/local IP address is the one your device uses on your home network. That is the address you usually change on the device itself or reserve on the router.

A public IP address belongs to the connection your internet provider gives you. You usually cannot change that directly from a phone or computer.

1. Write down the current `IP address`, `subnet mask`, `gateway`, and `DNS` values before you change anything.

Those values let you put the device back exactly where it was if the new settings do not work.

1. Decide whether to use a router reservation or a manual static IP.

If your router supports a DHCP reservation, that is often the safer option because the router keeps handing the same address to the same device.

If you need to enter the address on the device itself, switch from automatic assignment to manual/static settings and use an address inside your router’s local range but outside its DHCP pool.

A wrong static IP can cut the device off from the network until you change it back.

1. Enter the new network values.

Use the address you chose, then enter the matching `subnet mask`, `gateway`, and `DNS` values.

Leave the other fields unchanged unless your router or network setup requires something different.

1. Save the change and reconnect the device.

On phones and computers, this may mean toggling Wi-Fi off and on or reconnecting to the network.

On a router reservation, reconnect the device so it picks up the reserved address.

1. If you need to change your public IP address, contact your internet provider or renew the connection as your service allows.

That address is usually assigned by the ISP, not by the device itself, so the exact method depends on the provider.

1. If the connection fails, go back to automatic addressing and restore the old values you wrote down.

If the device still will not connect, check whether the new address is duplicated or outside the correct subnet before trying again.

## How to check that the new IP address is live

The change worked if the device shows the new address in its network details and still reaches your local network or the internet.

On Windows, macOS, iPhone, and Android, open the active network details and confirm the displayed IP address matches what you entered. On a router reservation, check that the device now shows the reserved address after reconnecting.

A quick network check should show three things:

- The new IP address is listed in the device settings.
- The gateway is reachable, so the device can see the router.
- Websites or local devices on the same network still respond.

If you want a second check on a computer, open a terminal or command prompt and compare the reported address with the one you set. If the device is back online and the settings page shows the new value, you’re done. If not, go back to automatic addressing, reconnect, and try again with the router’s current network range.

## Conclusion

Once the device is back online, keep a note of the \`IP address\`, \`gateway\`, \`subnet mask\`, and \`DNS\` values you used. That makes the next change easier and helps if the device later loses its place on the network. If you need the address to stay stable long term, a router reservation is usually easier to manage than a manual static setup on the device itself.

## Frequently Asked Questions

### Can I change my public IP address from my phone or computer?

Usually not directly. Public IP addresses are assigned by your internet provider to your router or modem, not to an individual device on the home network. For a different public IP, you usually need your ISP to change it or you need your connection to renew one dynamically.

### What is the safest way to set a static IP?

Use an address inside your router’s local range but outside the DHCP pool, then enter the matching \`subnet mask\`, \`gateway\`, and \`DNS\`. If your router supports it, a DHCP reservation is often safer than setting a permanent manual IP on the device.

### Why does Wi-Fi still connect after I change the IP but the internet stops working?

That usually means the device can still talk to the router locally, but the \`gateway\` or \`DNS\` is wrong. It can also happen if the address is duplicated or outside the correct subnet.