> ## Content Index
> Fetch the complete content index at: https://routerhaven.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# /26 subnet mask: address range, usable IPs, broadcast
- URL: https://routerhaven.com/26-subnet-mask/
- Published: 2026-11-10T06:04:00.000Z
- Updated: 2026-11-10T06:04:00.000Z
- Author: Caleb Renwick
- Tags: Networking

A /[26 subnet mask means](https://routerhaven.com/subnet-mask-networking/) the first 26 bits of the IP address are the network part, and the last 6 bits are for hosts. In dotted-decimal form, that is 255.255.255.192, and it gives you 64 total addresses with 62 usable host addresses. If you’re given a /26, you can work out the network address, usable IP range, and broadcast address by using the block size. Once you know that, you do not have to guess.

## What does /26 actually mean?

CIDR notation counts how many bits are [fixed for the network](https://routerhaven.com/private-ip-address-ranges/) part of the address. With /26, 26 bits are network bits and 6 bits are left for host addresses.

That maps to the subnet mask 255.255.255.192\. Each octet of the mask is 8 bits, so the first three octets are fully set to 255, and the last octet is 192 because the first two bits in that octet are network bits: 11000000 in binary. The remaining six bits of that octet are host bits.

For example, if someone gives you 192.168.1.64/26, the /26 tells you the mask is not 255.255.255.0 or 255.255.255.128\. It is 255.255.255.192, and that changes how the addresses are grouped.

## How many IPs you get in a /26

A /26 leaves 6 host bits, so the total number of addresses is 2^6 = 64\. That includes the network address and the broadcast address.

Out of those 64 addresses, 62 are usable for devices. The first address in the block is reserved as the network address, and the last address is reserved as the broadcast address.

So the simple rule is:

- Total addresses: 64
- Usable host addresses: 62

For example, a /26 block can fit 62 devices if every address is assigned to a host. In real networks, you usually leave some room for infrastructure devices like routers, printers, or access points, so you often assign fewer than 62.

## How to find the network, usable range, and broadcast address

Use a concrete subnet, such as 192.168.1.64/26\. The easiest way is to find the block size in the last octet.

For a /26, the block size is 64 because 256 - 192 = 64\. That means the subnets in the last octet start at 0, 64, 128, and 192.

For 192.168.1.64/26:

- Network address: 192.168.1.64
- First usable IP: 192.168.1.65
- Last usable IP: 192.168.1.126
- Broadcast address: 192.168.1.127

Why those numbers? The block runs from 64 up to 127\. The first address, 64, is the network address. The last address, 127, is the broadcast address. Everything in between is usable for hosts.

If you were given 192.168.1.130/26 instead, it would fall in the 128–191 block, so the network would be 192.168.1.128 and the broadcast would be 192.168.1.191.

![A Wi‑Fi router is shown next to a notepad on a desk.](https://tse1.mm.bing.net/th?q=Wi%E2%80%91Fi%20router%20next%20to%20notepad&w=624&h=352&c=7)

## Where a /26 fits in real networks

A /26 is a good fit when you need a small to medium subnet that is larger than a /27 but smaller than a /25\. It gives you 62 usable addresses, which is often enough for a small office VLAN, a guest Wi‑Fi segment, a lab network, or a limited pool of server or appliance addresses.

People also use /26s when they want to split a larger network into several equal parts. For example, one /24 can be divided into four /26 subnets, each with its own network, host range, and broadcast address.

It does not fit well if you expect more than 62 usable hosts in one broadcast domain. In that case, you would need a larger subnet, such as a /25 or /24, depending on the address plan.

![A Wi‑Fi router sits in a small office workspace.](https://tse1.mm.bing.net/th?q=Wi%E2%80%91Fi%20router%20in%20small%20office&w=624&h=352&c=7)

## Common mistakes people make with /26

The most common mistake is confusing total addresses with usable addresses. A /26 has 64 total addresses, but only 62 can be assigned to devices.

Another common error is getting the block size wrong. For /26, the increment is 64 in the last octet, not 26\. The subnet blocks are 0, 64, 128, and 192 in each 256-address octet.

People also forget that the first and last addresses in each block are reserved. If your subnet is 192.168.1.64/26, then 192.168.1.64 is not a host address, and 192.168.1.127 is not a host address either.

A smaller but useful check: make sure you are applying the mask to the right octet. If the prefix is not a neat boundary like /8, /16, or /24, the subnet math usually depends on the partial octet, which is where many mistakes happen.

## Quick way to check your answer

You can spot a /26 block quickly by remembering two things: the mask is 255.255.255.192, and the block size is 64.

That means the valid subnet starts in the last octet at 0, 64, 128, or 192\. If an IP ends in a number between 64 and 127, it belongs to the 64/26 block. If it ends between 128 and 191, it belongs to the 128/26 block, and so on.

A fast mental check looks like this:

- Find the nearest lower multiple of 64 in the last octet
- That is the network address
- Add 63 to get the broadcast address
- The first usable IP is network + 1

For example, with 192.168.1.150/26, the nearest lower multiple of 64 is 128\. So the network is 192.168.1.128, the broadcast is 192.168.1.191, and the usable range is 192.168.1.129 through 192.168.1.190.

![A Wi‑Fi router sits beside printed notes on a desk.](https://tse1.mm.bing.net/th?q=Wi%E2%80%91Fi%20router%20beside%20printed%20notes&w=624&h=352&c=7)

## Conclusion

If you’re handed a /26, the key numbers are fixed: the mask is 255.255.255.192, each subnet has 64 addresses, and 62 of them are usable. From there, find the nearest lower multiple of 64 in the last octet to get the network address, then add 63 for the broadcast address. If you need a quick check, look for the 0, 64, 128, or 192 block in the last octet. That will tell you which /26 subnet the IP belongs to.

## Frequently Asked Questions

### What is the subnet mask for /26?

The dotted-decimal subnet mask for /26 is 255.255.255.192.

### How many usable IP addresses are in a /26?

A /26 has 62 usable host addresses.

### What is the broadcast address in a /26?

It depends on the subnet block. For example, in 192.168.1.64/26, the broadcast address is 192.168.1.127.

### How do I know which /26 subnet an IP belongs to?

Look at the last octet and find the nearest lower multiple of 64\. That number is the network address for the /26 block.